PowerBar V3 LED Module Aluminium UV 365nm 12180mW 700mA 12 Nichia 233 LEDs 29cm

The PowerBar UV LED modules are compact and very powerful, being designed for applications where a lot of light is needed per square meter, such as disinfection, plant growth, ink or resin curing, lithography for medical,  industrial, commercial applications. This PowerBar V3 module is 28 cm long and equipped with 12 high power LEDs Nichia UVA LEDs of 365nm.

The PowerBar V3 LED modules are our newest version of the PowerBar family from Ledrise. Through the use of a aluminum PCB, the heat management is significantly improved. In addition, an NTC resistor is used on the module, which allows temperature monitoring via an external control unit. The PowerBar V3 strips each consist of 12 connected segments with an area of 28.5 x 23.85 mm each. The strips can be divided with a saw, whereby each segment can also be used individually. On the first and last section, a terminal is mounted for simplified connection without soldering.

The PowerBar V3 aluminum LED bars are provided with holes that simplify the mounting of lenses. Many lenses from Ledil and Carclo, which are also available here in the shop, are compatible and thus enable a wide range of applications.

Build your individual luminaire with our PowerBar V3 strips

With the matching accessories of our PowerBar V3 system, it is possible to assemble a complete luminaire. You have several options:

Option 1

• Powerbar V3 Heat sink 31631
• Heat conductive adhesive pad 31623
• Mounting clip 32381

Option 2

• Powerbar V3 Heat sink 31631
• Heat conductive adhesive pad 31623
• Mounting clip 32381
• Individual UV lenses 

Features

• You will receive a PowerBar V3 LED module equipped with 12 powerful 233 series UV LEDs from Nichia, the market leader in UV power LEDs
• Huge UV light output of 12180 mW at 120° angle
• Long-life LEDs from Nichia
• 700mA LED module, at 37.2V
• 31.08W
• Simple plug-and-play system
• 5 years warranty
• Divisible by each segment
• Better heat management thanks to aluminium circuit board
• Dimmable
• Constant current operation
• Optimized for lens systems
• NTC for temperature monitoring via external control unit
• Dimensions: 286 x 28.5 x 4.5 mm
• Mage in Germany

Application focus: Continuous disinfection with safe UVA radiation

*Irradiance limited to 10W/m² at 2 meters height from the floor.

**details in the article at this link.

Example of continuous disinfection with PowerBar V3: Work areas of 75 - 100 cm height from pendants at 170 cm height (1 x PowerBar) or from ceiling lights at 250 cm height (3 x PowerBar)

Example based on the below Irradiance estimation for the PowerBar V3 with a radiance flux of 12W UVA 365nm, based on the distance from the LED source. Warning UV danger for eyes and skin

UVA radiation in the wavelength range of 200-400 nm of more than 10W/m² may cause inflammation of the cornea as well as a UV erythema (sunburn) of the skin. The biological effectiveness of the UV radiation varies in the stated wavelength range and is described with the spectral response function (weighting scale) SUV. 

Safety precautions when using UV light sources must be respected, as detailed in  IEC Standard 62471:2006, ‘Photobiological Safety of Lamps and Lamp Systems’, EU-Directive-2006-25-EC or the applicable standard for your country.