Lumistrips UK
Lumistrips US
Lumistrips ES
Lumistrips ITA
FlexOne2080 Samsung LED Strip warm white 2700K 6090lm 12V 20 LEDs/m 5m reel (1218lm/m 16.8W/m)
- High-output flexible LED strip with unusually fine single-LED segmentation
- Can be cut after every LED at 50 mm intervals
- 6090 lm per 5 m reel / 1218 lm per metre
- 20 Samsung LM283 LEDs per metre / 100 LEDs per reel
- 12 V DC operation
- Dimmable with a compatible 12 V system
- Made in Germany with a 5-year commercial warranty
The FlexOne2080 is a professional high-output LED strip designed for flexible architectural and indirect lighting where unusually precise length adjustment is useful. Unlike conventional LED tape that can only be shortened after groups of LEDs, the FlexOne2080 can be divided after every single LED at 50 mm intervals.
This 2700 K version delivers 6090 lm from the 5 m reel, equivalent to 1218 lm/m, using 20 Samsung LM283 LEDs per metre. Its combination of 12 V operation, integrated linear current control and single-LED segmentation makes it especially practical for custom coves, furniture, recessed profiles and architectural details that must finish at an exact length.
Features of the FlexOne2080 LED strip
- 2700 K white light
- CRI 80+
- 6090 lm per 5 m reel / 1218 lm per metre
- 16.8 W per metre
- 20 Samsung LM283 LEDs per metre / 100 LEDs per reel
- 12 V DC operation
- Can be cut after every LED at 50 mm intervals
- Integrated linear control for consistent brightness along the strip
- Dimmable with a compatible 12 V system
- Thermally conductive double-sided adhesive backing
- Uniform white light through controlled LED binning
- 5-year commercial warranty, subject to current warranty conditions
- Made in Germany
High-output cove and indirect lighting
The FlexOne2080 is particularly well suited to cove and indirect lighting. At more than 1200 lm/m, the reflected ceiling or wall can contribute meaningful ambient illumination rather than only a decorative glow.
The 2700 K warm-white version is particularly suitable for homes, hotels, restaurants and retail interiors where the indirect light should create a relaxed and welcoming atmosphere. The 50 mm cutting pitch also makes it easier to finish coves cleanly at corners, wall transitions and custom architectural dimensions.
Precise length adjustment for furniture and custom profiles
Single-LED segmentation is the defining advantage of the FlexOne concept. The 8 mm wide strip can be adapted in 50 mm steps, giving designers much more freedom when integrating light into shelves, cabinets, showcases, kitchen furniture and recessed profiles.
The built-in linear control helps maintain consistent LED current along the strip, which is useful in installations where the strip is supplied from one end and visual uniformity matters.
General and task lighting from compact linear profiles
With 1218 lm/m, the FlexOne2080 can also be integrated into compact profiles for supplementary general lighting, worktop illumination and task lighting. The final illuminance depends on the profile, diffuser, mounting height and room geometry, so the strip should be considered as part of the complete optical system rather than on lumen output alone.
White-light quality and colour temperature
Colour temperature strongly influences how a space is perceived: warmer white supports a more relaxed atmosphere, while neutral and cooler white light is often preferred in task-oriented and technical environments. For further guidance, see our colour temperature guide and CRI guide.
Installation and electrical integration
Operate the strip from a regulated 12 V DC constant-voltage power supply. It can be shortened every 50 mm at the designated points and installed using the thermally conductive adhesive backing on a clean, stable surface.
For longer installations, conductor sizing and feed-point placement should be planned to minimise voltage drop. Select the power supply with adequate reserve above the calculated connected load and use a compatible 12 V dimmer where adjustable brightness is required.
Our manufacturing and quality promise
We develop and manufacture professional LED strips and modules in Germany, combining more than 20 years of LED application experience with automated production and application engineering. Our focus is on repeatable performance, carefully selected components and light engines that can be integrated reliably into professional lighting systems.
For project customers, we can also support custom development, PCB adaptation, LED selection, thermal design, prototyping and series production. This allows the light engine to be matched to the luminaire or architectural application instead of forcing the project around a generic LED tape.
Learn more about Lumistrips and our LED manufacturing capabilities.
| SKU | 31647 |
|---|---|
| Weight brut (g) | 1.000000 |
| Color | Warm White |
| Color Temperature | 2700K |
| Color Rendering Index | 80 |
| Luminous Flux per meter | 1218 |
| Bright like (W) | 102 |
| Luminous Flux Typ (lm) | 6090 |
| Efficacy (lm per W) | 73 |
| Energy Class 2022 | G |
| Power (W) | 84 |
| Viewing Angle | 120° |
| Warranty (months) | 60 |
| Lifetime for residential, 3h daily (yrs) | 55 |
| Product lifetime (h) | 60000 |
| Lifetime for commercial, 12h daily (yrs) | 14 |
| Manufacturer Product Code | 4260127451093 |
| Product Family | FlexOne2080 |
| Strip Type | Flexible |
| Strip LEDs per meter | 20 |
| LEDs number per sales unit | 100 |
| Dimensions | 5000x8x1.4 |
| Dimensions: Length (cm) | 500 |
| Dimensions: Width (mm) | 8 |
| Dimensions: Height (mm) | 1.4 |
| Brand | Lumistrips |
| Manufacturer Part Number | 4260127451093 |
| Forward Voltage Typ (V) | 12 |
| Availability beyond shown stock: | YES |
