Lumistrips UK
Lumistrips US
Lumistrips ES
Lumistrips ITA
LumiBar-52-3098+ Toshiba-SSC LED Strip Sunlike CRI98 warm white 3500K 1345lm 350mA 39.6V 52 LEDs 56cm module (2402lm/m 25W/m)
- Rigid linear LED module built around Zhaga-style mechanical dimensions for professional luminaires
- 52 SunLike TRI-R LEDs
- 3500 K full-spectrum white light
- CRI 98+
- 1345 lm per module / approximately 2402 lm per metre
- 3-Step MacAdam colour consistency
- Made in Germany with a 5-year commercial warranty
The LumiBar3098+ SunLike is a rigid full-spectrum LED module for colour-critical linear lighting. This 560 mm, 3500 K version uses 52 SunLike TRI-R LEDs and delivers 1345 lm at CRI 98+, equivalent to approximately 2402 lm/m.
SunLike technology is designed to produce a broader, more daylight-like white spectrum than conventional phosphor-converted LEDs. This makes the module particularly useful where subtle colour differences, skin tones, materials and artwork should remain natural-looking.
Features of the LumiBar3098+ SunLike module
- 560 mm rigid linear module
- 3500 K full-spectrum white light
- CRI 98+
- 52 SunLike TRI-R LEDs
- 1345 lm per module / approximately 2402 lm per metre
- Constant-current operation at 350 mA
- Approximately 39.6 V module voltage
- Approximately 13.86 W per module
- 3-Step MacAdam colour consistency
- Solderless / plug-and-play connection concept
- Wide approximately 120° emission
- Designed to operate without an additional heat sink in the intended configuration
- 5-year commercial warranty, subject to current warranty conditions
- Made in Germany
Natural-spectrum lighting for colour-critical applications
CRI 98+ and the broad SunLike spectrum make this module especially relevant for museums, galleries, retail, fashion, jewellery, hairdressing, printing, studios and medical interiors where colour fidelity is a primary design requirement. The spectrum is also useful where visual comfort and natural-looking materials are more important than maximizing lumens alone.
Rigid light engine for professional linear luminaires
The rigid PCB is designed for linear luminaires, continuous light lines and compact commercial fixtures where a straight, mechanically stable LED board is preferable to flexible tape. The defined LED pitch helps create a smooth luminous line behind a suitable diffuser, while the rigid module simplifies repeatable positioning inside an OEM luminaire.
For guidance on profile depth, diffuser distance and LED spacing, see our linear fixture design guide.
Troffers and diffuse commercial luminaires
The module is also suitable for troffers and diffuse ceiling luminaires. Multiple modules can be arranged in rows behind a diffuser to create a broad luminous surface for offices, classrooms, healthcare spaces, retail and other commercial interiors. Final spacing should be selected according to the diffuser, optical distance and required luminance uniformity.
Application fit for 3500 K full-spectrum white light
The balanced white tone is useful for commercial spaces that need a welcoming appearance without becoming strongly warm.
Built around the Zhaga Book 7 linear-module standard
This module is designed around the Zhaga Book 7 L56W2 linear-module form factor. The L56W2 category gives the luminaire designer a recognized mechanical envelope and keep-out area for this class of linear LED module. This can simplify mechanical design, sourcing, servicing and later product revisions when a luminaire family is built around standardized module dimensions.
Zhaga Book 7 supports mechanical interoperability, but it does not make the electrical operating point, luminous flux, efficiency or optical performance identical between modules from different manufacturers. The LED driver current, forward-voltage range, connector arrangement, thermal conditions and photometric performance must therefore still be checked for the specific module and luminaire.
Book 7 has also been published as IEC 63356-2. The modules require a separate LED driver and are intended for professional luminaire integration and servicing.
Constant-current driver integration
The module requires a regulated constant-current driver set to 350 mA. The driver voltage range must accommodate the module forward voltage and any series-connected modules used in the luminaire. Electrical architecture should be validated for the actual module count and thermal operating conditions.
Designed and manufactured in Germany
We develop and manufacture professional rigid LED modules and flexible LED light engines in Germany, combining more than 20 years of LED application experience with controlled SMT production and application engineering. Our focus is on predictable optical performance, specified LED components, repeatable electrical characteristics and light engines that can be integrated reliably into professional luminaires.
For OEM and project customers, we can also support LED selection, PCB adaptation, thermal design, prototyping, optical evaluation and series production. This allows the light engine to be matched to the luminaire and application instead of forcing the project around a generic LED board.
Learn more about Lumistrips and our LED manufacturing capabilities.
| SKU | 34295 |
|---|---|
| Weight brut (g) | 1.000000 |
| Color | Warm White |
| Color Temperature | 3500K |
| Color Rendering Index | 98 |
| Luminous Flux per meter | 2402 |
| Bright like (W) | 201 |
| Luminous Flux Typ (lm) | 1345 |
| Efficacy (lm per W) | 98 |
| Energy Class 2022 | F |
| Power (W) | 13.86 |
| Viewing Angle | 120° |
| Warranty (months) | 60 |
| Forward Current Max | 350 |
| Manufacturer Product Code | 34295 |
| Product Family | Lumibar3098+ |
| Strip Type | Rigid |
| Strip LEDs per meter | 93 |
| LEDs number per sales unit | 52 |
| Dimensions | 560x20x4.55 |
| Dimensions: Length (cm) | 56 |
| Dimensions: Width (mm) | 20 |
| Dimensions: Height (mm) | 4.55 |
| Brand | Lumistrips |
| Manufacturer Part Number | 4260127459051 |
| Forward Voltage Typ (V) | 39.6 |
| Availability beyond shown stock: | NO |
