Multibar3090 Nichia LED Strip neutral white CRI90 4000K 890lm 24V 44 LEDs 50cm bar (1780lm/m 13W/m)

The MultiBar3090 is a professional rigid 24 V LED module for high-quality linear lighting. Each 500 mm bar uses 44 Nichia 757G LEDs and delivers 890 lm, equivalent to approximately 1780 lm/m, with CRI 90+ and a power density of about 13 W/m.

Its defining feature is the proprietary MultiBar plug-and-play system: rigid bars can be joined into long, evenly spaced light lines without soldering, making the product particularly practical for custom luminaires, furniture, coves, exhibition systems and repeatable OEM assemblies.

Features of the MultiBar3090 rigid LED module

• 500 mm rigid LED bar
• 4000 K white light
• High colour rendering: CRI 90+
• 44 Nichia 757G LEDs per module / 88 LEDs per metre
• 890 lm per 500 mm module / approximately 1780 lm per metre
• Approximately 13 W per metre
• 24 V DC operation
• 3-Step MacAdam colour consistency
• 10 mm wide, low-profile rigid PCB
• Plug-and-play direct-connector system
• Modules can be linked into long continuous light lines without soldering
• Separated sections can be reused with the appropriate connection hardware
• Designed for operation without additional cooling in the intended configuration
• 5-year commercial warranty, subject to current warranty conditions
• Made in Germany

MultiBar plug-and-play rigid-module system

MultiBar is built around a proprietary plug-and-play connection concept rather than the mechanical interface of a Zhaga module. The 500 mm rigid bars can be linked directly to form longer, evenly spaced lines of light without soldering, reducing assembly work in luminaires, furniture and architectural installations.

The connection system is also designed so shorter separated sections can remain usable with the appropriate connectors. This gives the installer more freedom to adapt a light line to the available space while retaining a clean, serviceable electrical connection.

For repeated installations, the system can simplify production and servicing because modules and connectors can be assembled in a consistent way instead of individually soldering every joint. Existing product data specifies that the direct-connector system can be used to link up to 46 modules in an installation, subject to the power-feed and wiring design of the complete system.

High-output linear lighting without soldered joints

At approximately 1780 lm/m, the MultiBar3090 can serve as a primary light engine inside linear luminaires, shelf systems and continuous architectural light lines. The rigid PCB keeps the LED pitch straight and repeatable, while the direct connector preserves even LED spacing between adjacent modules.

This is particularly useful for production luminaires and long custom light lines where repeated solder joints would otherwise add assembly time and service points. For optical integration guidance, see our linear fixture design guide.

Bright cove and indirect lighting

The MultiBar3090 is also suitable for cove and indirect lighting. With around 1780 lm/m, the reflected wall or ceiling can contribute meaningful room illumination rather than only a decorative glow.

The 4000 K neutral-white version is particularly suitable for offices, kitchens, classrooms, clinics, shops, studios and other functional interiors where a clean, focused white light is preferred. The plug-and-play architecture is useful in long coves because multiple rigid modules can be linked into a straight, serviceable light line without soldering every joint.

Troffers and diffuse commercial luminaires

The MultiBar3090 can be arranged in rows for troffers and diffuse luminaires. The rigid geometry helps maintain predictable LED spacing behind the diffuser, while the modular connector system makes installation and replacement easier in repeated fixture designs.

White-light horticulture applications

The 4000 K version is also suitable for controlled-environment agriculture, including lettuce production and microgreens. The rigid 500 mm bar format allows modules to be arranged in repeatable rows over trays and cultivation shelves, while the plug-and-play system can simplify construction and servicing of modular grow-light assemblies.

Grow-light systems should be dimensioned from PPFD, uniformity, mounting distance and thermal conditions rather than from lumen output alone.

High-quality Nichia white light

Nichia 757G LEDs, CRI 90+ and 3-Step MacAdam colour sorting make the MultiBar3090 suitable for retail, hospitality, office, residential and display lighting where both brightness and colour consistency matter.

The white rigid PCB is suited to conventional linear luminaires, profiles, furniture and concealed architectural details. For more background on white-light appearance, see our colour temperature guide and CRI guide.

24 V system integration

The MultiBar3090 operates from a regulated 24 V DC supply. For longer linked runs, conductor size, feed-point placement and total connected power should be planned so voltage drop remains controlled along the installation.

Because the MultiBar system uses its own modular connectors rather than a standardized Zhaga mechanical interface, use connection components intended for the MultiBar platform when extending, splitting or servicing the light line.

Designed and manufactured in Germany

We develop and manufacture professional LED strips and rigid LED modules in Germany, combining more than 20 years of LED application experience with controlled production and application engineering. Our focus is on specified LED components, repeatable optical performance and light engines that can be integrated reliably into professional and OEM lighting systems.

For project customers, we can also support custom development, PCB adaptation, LED selection, thermal design, prototyping and series production. This allows the light engine and connection concept to be matched to the luminaire or architectural application.

Learn more about Lumistrips and our LED manufacturing capabilities.