LumiBarTW-112-4098+ Nichia Dynasolis LED Strip Zhaga CRI90 white Azure+2000+4000K 1140lm 24V 112 LEDs 28cm module (4000lm/m 23W/m)

The LumiBarTW-112-4098+ Dynasolis is a three-channel rigid LED module for advanced human-centric and spectrum-tunable lighting. It combines 2000 K, 4000 K and Azure Nichia LEDs on one 279.5 mm board, allowing the control system to adjust both visual colour temperature and the spectral contribution around the blue-cyan region.

Features of the LumiBarTW Dynasolis module

• Three independently controllable channels: 2000 K, 4000 K and Azure
• 112 Nichia LEDs: 28 × 2000 K, 28 × Azure and 56 × 4000 K
• CRI 90 white-light channels
• Up to 1140 lm at 4000 K, approximately 510 lm at 2000 K and 417 lm from the Azure channel
• Up to approximately 4000 lm/m at 4000 K
• 24 V DC operation per channel
• Solderless connection
• 3-Step MacAdam colour consistency
• 279.5 × 20 mm rigid PCB
• Designed to operate without an additional heat sink in the intended configuration
• 5-year commercial warranty, subject to current warranty conditions
• Made in Germany

Spectrum-tunable human-centric lighting

Dynasolis adds an Azure channel to conventional warm/neutral white control, allowing the lighting system to vary the spectrum as well as the visible colour temperature. This makes the module relevant to workplaces, healthcare, education and other interiors where the lighting concept includes time-of-day scenes and melanopic-light considerations. Learn more in our human-centric lighting guide.

Rigid light engine for professional linear luminaires

The rigid PCB is designed for linear luminaires, continuous light lines and compact commercial fixtures where a straight, mechanically stable LED board is preferable to flexible tape. The defined LED pitch helps create a smooth luminous line behind a suitable diffuser, while the rigid module simplifies repeatable positioning inside an OEM luminaire.

For guidance on profile depth, diffuser distance and LED spacing, see our linear fixture design guide.

The module is also suitable for troffers and diffuse ceiling luminaires. Multiple modules can be arranged in rows behind a diffuser to create a broad luminous surface for offices, classrooms, healthcare spaces, retail and other commercial interiors. Final spacing should be selected according to the diffuser, optical distance and required luminance uniformity.

Cove and indirect lighting with spectral tuning

The rigid board can also be used in cove lighting when the reflected surface is intended to carry different spectral and white-light scenes during the day.

Built around the Zhaga Book 7 linear-module standard

This module is designed around the Zhaga Book 7 concept for professional linear LED modules. Zhaga Book 7 defines standardized mechanical envelopes and keep-out areas that allow luminaire platforms to be developed around recognized module dimensions rather than a proprietary PCB geometry. This can simplify mechanical design, sourcing, servicing and later product revisions when a luminaire family is built around standardized module dimensions.

Zhaga Book 7 supports mechanical interoperability, but it does not make the electrical operating point, luminous flux, efficiency or optical performance identical between modules from different manufacturers. The LED driver current, forward-voltage range, connector arrangement, thermal conditions and photometric performance must therefore still be checked for the specific module and luminaire.

Book 7 has also been published as IEC 63356-2. The modules require a separate LED driver and are intended for professional luminaire integration and servicing.

Three-channel 24 V control

The 2000 K, 4000 K and Azure groups are electrically independent and must be controlled as a multi-channel system. Select the controller and power supply for the intended simultaneous channel load and desired spectral scenes.

Designed and manufactured in Germany

We develop and manufacture professional rigid LED modules and flexible LED light engines in Germany, combining more than 20 years of LED application experience with controlled SMT production and application engineering. Our focus is on predictable optical performance, specified LED components, repeatable electrical characteristics and light engines that can be integrated reliably into professional luminaires.

For OEM and project customers, we can also support LED selection, PCB adaptation, thermal design, prototyping, optical evaluation and series production. This allows the light engine to be matched to the luminaire and application instead of forcing the project around a generic LED board.

Learn more about Lumistrips and our LED manufacturing capabilities.