LumiBarTW-112-4098+ Toshiba-SSC TW LED Strip Zhaga Sunlike full spectrum CRI98 white 2700K+3500+5000K 990lm 24V 112 LEDs 28cm module (3500lm/m 40W/m)

The LumiBarTW-112-4098+ is a premium multi-channel rigid LED module built around SunLike full-spectrum white light. It combines separate 2700 K, 3500 K and 5000 K channels on one 279.5 mm board, using 112 LEDs and 24 V DC operation to create tunable scenes from warm ambience to bright daylight-like white.

The SunLike spectrum and CRI 98+ make the module especially useful where colour perception is important: retail, fashion, jewellery, museums, galleries, studios, healthcare interiors and premium residential lighting.

Features of the LumiBarTW-112-4098+ SunLike module

• Three independently controllable white-light channels: 2700 K, 3500 K and 5000 K
• SunLike TRI-R full-spectrum LED technology
• CRI 98+
• 112 LEDs: 28 × 2700 K, 28 × 3500 K and 56 × 5000 K
• Up to 990 lm on the 5000 K channel; approximately 490 lm on the 2700 K or 3500 K channel
• Up to approximately 3500 lm/m
• 24 V DC operation per channel
• Maximum power approximately 11.2 W on the 5000 K channel and 5.6 W on the other channels
• Solderless connection
• 3-Step MacAdam colour consistency
• 279.5 × 20 mm rigid PCB
• Designed for operation without an additional heat sink in the intended configuration
• 5-year commercial warranty, subject to current warranty conditions
• Made in Germany

Human-centric and scene-based white lighting

The three white-light channels allow the same luminaire to move between warm evening light, a balanced intermediate white and a brighter daylight-like scene. This is useful in offices, healthcare interiors, classrooms, hospitality and homes where the preferred light changes with activity and time of day. Learn more in our human-centric lighting guide.

Colour-critical interiors and display lighting

CRI 98+ and the broad SunLike spectrum make this module especially attractive for art, fashion, jewellery, hairdressing, printing, museums and other environments where subtle colour differences should remain natural-looking. The low UV content is also beneficial where sensitive displayed materials are a concern.

Rigid light engine for professional linear luminaires

The rigid PCB is designed for linear luminaires, continuous light lines and compact commercial fixtures where a straight, mechanically stable LED board is preferable to flexible tape. The defined LED pitch helps create a smooth luminous line behind a suitable diffuser, while the rigid module simplifies repeatable positioning inside an OEM luminaire.

For guidance on profile depth, diffuser distance and LED spacing, see our linear fixture design guide.

The module is also suitable for troffers and diffuse ceiling luminaires. Multiple modules can be arranged in rows behind a diffuser to create a broad luminous surface for offices, classrooms, healthcare spaces, retail and other commercial interiors. Final spacing should be selected according to the diffuser, optical distance and required luminance uniformity.

Cove and indirect lighting with adjustable white light

The module can also be used in cove and indirect lighting where the rigid board can be integrated into a concealed profile and the colour temperature changed between scenes.

Built around the Zhaga Book 7 linear-module standard

This module is designed around the Zhaga Book 7 concept for professional linear LED modules. Zhaga Book 7 defines standardized mechanical envelopes and keep-out areas that allow luminaire platforms to be developed around recognized module dimensions rather than a proprietary PCB geometry. This can simplify mechanical design, sourcing, servicing and later product revisions when a luminaire family is built around standardized module dimensions.

Zhaga Book 7 supports mechanical interoperability, but it does not make the electrical operating point, luminous flux, efficiency or optical performance identical between modules from different manufacturers. The LED driver current, forward-voltage range, connector arrangement, thermal conditions and photometric performance must therefore still be checked for the specific module and luminaire.

Book 7 has also been published as IEC 63356-2. The modules require a separate LED driver and are intended for professional luminaire integration and servicing.

Three-channel control

Each colour-temperature group is controlled separately. The controller and power architecture must therefore be sized for the actual three-channel configuration rather than treated as a conventional single-channel white module.

Designed and manufactured in Germany

We develop and manufacture professional rigid LED modules and flexible LED light engines in Germany, combining more than 20 years of LED application experience with controlled SMT production and application engineering. Our focus is on predictable optical performance, specified LED components, repeatable electrical characteristics and light engines that can be integrated reliably into professional luminaires.

For OEM and project customers, we can also support LED selection, PCB adaptation, thermal design, prototyping, optical evaluation and series production. This allows the light engine to be matched to the luminaire and application instead of forcing the project around a generic LED board.

Learn more about Lumistrips and our LED manufacturing capabilities.