PowerController V2 Light Control Unit single color via DALI 102 4-outputs at 10-30VDC max. 300W

PowerController V2 Light Control Unit single color via DALI 102 4-outputs at 10-30VDC max. 300W

 PowerController V2 Light Control Unit single color via DALI 102 4-outputs at 10-30VDC max. 300W
 PowerController V2 Light Control Unit single color via DALI 102 4-outputs at 10-30VDC max. 300W  PowerController V2 Light Control Unit single color via DALI 102 4-outputs at 10-30VDC max. 300W  PowerController V2 Light Control Unit single color via DALI 102 4-outputs at 10-30VDC max. 300W

PowerController V2 Light Control Unit single color via DALI 102 4-outputs at 10-30VDC max. 300W

  • Up to four DALI devices (DALI 102) can be connected to the 4 outputs (CH1-CH4)
  • Total switchable up to  300 W or 10 A via the output channels (1x 10 A / 2x 5 A)
  • For control of constant voltage LED modules (output voltage from 12 - 30 V)
€87.61
Low Stock, only 10 pcs.
SKU
32156

Compact controller with full DALI 102 compatibility 

This new version of the PowerController V2 is a powerful control unit for dimming of single color LED modules via the DALI control protocol. You have the option of integrating up to 4 DALI 102 devices into a DALI system from a small package of only 100 x 29 x 13 mm in size. The DALI devices can be LED modules or strips with 10-30VDC input voltage and up to 300W total power. You can connect them in one chain for single control or in up to 4 chains for individual or group control.

And this is how the installation works

Connection

Connect the two DALI inputs (DA2) on the power controller to the DALI BUS cable. The 4 outputs (CH1-CH4) are each connected to the negative lead of the monochrome modules, while the positive leads are connected to OUT via terminals (part no. 33736). The operating voltage comes from GND and VCC. 

How it works

After all components have been properly wired, power can be applied to the PowerController V2 DALI and an addressing can then be performed on the DALI-BUS. Depending on the software used, new DALI devices will appear which can now be individualized.

Simple installation due to minimal size

The slim format and the practical input or ouput terminals allows easy installation in control cabinets. A total of up to 10 A can be switched via the outputs. The PowerController V2 DALI allows the control of constant voltage LED modules.

Control of multiple constant current LED modules is also possible

The Powercontroller V2 unit is compatible with the new extension constant current LED driver, article number 34722. With this driver you can control up to 4 groups of lightsources at a constant current of 1-1500mA and 4-42 V, such our LinearZ LED modules.

Features

  • Up to four DALI devices (DALI 102) can be connected to the 4 outputs (CH1-CH4)
  • Output power: 120 W at 12 V DC; 240 W at 24 V DC; 300 W at 30 V DC
  • Total switchable up to 10 A via the output channels (1x 10 A / 2x 5 A)
  • For control of constant voltage LED modules (output voltage from 12 - 30 V)
  • Input voltage depending on LED module (12 - 30 V)
  • The compact design with a height of 13 mm and a width of 29 mm allows easy installation in control cabinets. The practical clamps enable easy and quick installation.
  • Ideal for controlling all types of luminaires with monochrome LED modules, e.g. ceiling luminaires, industrial luminaires, floor luminaires, wall luminaires, suspended luminaires
Technical Data
SKU 32156
Weight brut (g) 1.000000
Brand Lumistrips
Manufacturer Product Code 32156
Dimensions: Length (cm) 10
Dimensions: Width (mm) 29
Dimensions: Height (mm) 13
Availability beyond shown stock: YES
Product Family PowerController
Write Your Own Review
You're reviewing: PowerController V2 Light Control Unit single color via DALI 102 4-outputs at 10-30VDC max. 300W
Your Review

Variants