UVC Bolb 2S2P-S6060 LED Module 4 LEDs 275nm 360mW 9.6W 5cm

The Bolb LED module features one of the most efficient UV-C LEDs in the industry, with four high-power UV-C LEDs from the 6060 series that deliver an optical output of an impressive 360 mW. These UV-C LEDs are the most energy-efficient in the industry, with an industry-leading energy conversion efficiency in the UV-C sector. The S6060 High-Power UV-C LEDs emit at a wavelength of 275 nm, and their accuracy in inactivating viruses, bacteria, and other germs is up to 99.99999%. These features make them an excellent choice for applications in the industrial sector, particularly for sterilization or disinfection.

Bolb Inc. is a leading provider of deep UV LED solutions based in the United States. The company is a manufacturer of high-power solid-state UVB/C lamps and is known for developing the industry's most efficient UVC LEDs. Bolb's technical expertise ranges from epitaxy to the manufacture of equipment and complete UV systems. Bolb's ultra-efficient LEDs are being integrated into a new generation of portable and home appliances, medical devices, and industrial processing equipment, contributing to a healthier world.

The Bolb 2S2P-S6060 UV-C LED module is a 2x2 LED array with four high-power Bolb UV-C LEDs from the 6060 series. It emits at a wavelength of 275 nm and has a radiant UVC power of 360 mW. The input power is 9.6W, and it operates at 600mA at 16V. The LED dimensions are 6 x 6 x 1.35 mm, and the dimensions of the module are 50 x 22 x 3 mm. It has an extremely high efficiency and an inactivation rate of up to 99.99999%. It also offers an excellent price-performance ratio.

Caution should be taken when using this product. The LED module emits non-visible light, which poses a risk to the skin and eyes even when exposed for a short time. We strongly advise seeking advice from our staff before purchasing the product. The module falls under the risk group 3 (EN 62471), and users must wear suitable protective clothing against UV radiation at all times. The use of safety goggles, gloves, face shields, and protective clothing that shields UV light from the skin is recommended. Users must also ensure that no other persons are within reach of the radiation source without taking appropriate safety precautions. Special precautions must be taken with reflecting surfaces, and if skin tissue is exposed to the light source, skin irritation comparable to sunburn may occur. It is important to treat the affected areas with a suitable cream or consult a physician. Low wavelength UV light can cause permanent damage to the retina in severe cases. Hence, wearing protective goggles at all times is essential when using the device.

Overall, the Bolb LED module is an excellent choice for anyone looking for high-powered UV-C LEDs with exceptional efficiency and accuracy in inactivating viruses, bacteria, and other germs. Its price-performance ratio is also excellent, making it a valuable investment for the industrial sector.

Features of the Bolb 2S2P-S6060 UV-C LED module

• 2x2 LED array with four high-power Bolb UV-C LEDs
• 6060 series
• Wavelength: 275 nm
• Radiant UVC power: 360 mW
• 600mA at 16V, input power 9.6W
• Extremely high efficiency
• Inactivation rate of up to 99.99999%
• Excellent price-performance ratio
• Risk group 3 (EN 62471)
• LED dimensions (L x W x H): 6 x 6 x 1.35 mm
• Dimensions of the module: 50 x 22 x 3 mm

Application areas

• Disinfection (e.g. water)
• Sterilization (e.g. surfaces, air)

Warnings

• The article is a powerful UV-C LED which can be used for the disinfection of surfaces. It emits at a wavelength of 275 nm which is not visible to the human eye.
• It is imperative to ensure that users wear suitable protective clothing against UV radiation at all times. All skin and eye contact must be avoided.
• We recommend the use of the following protective agents:
  • Safety goggles
  • Gloves
  • Face Shield
  • Protective clothing that shields UV light from the skin
• Wear protective clothing at all times during use and ensure that no other persons are within reach of the radiation source without taking appropriate safety precautions.
• Light can reflect, therefore special precautions have to be taken with reflecting surfaces (e.g. mirrors).
• If skin tissue is exposed to the light source, skin irritation comparable to sunburn may occur. If necessary, treat the affected areas with a suitable cream or consult a physician.
• Low wavelength UV light can cause permanent damage to the retina in severe cases. Make sure to wear protective goggles at all times when using the device.